Joyoung International Trading Co.,Ltd
Joyoung International Trading Co.,Ltd Your industrial automation spare parts product expert
Add to Cart
IC698CPE040 GE 1800MHz Pentium-M Microprocessor With 64 MB Of User Memory And 64 MB Of User Flash
Product Details:
| Brand Name | GE |
| Model | IC698CPE040 |
| Catalog | IC698 |
| Origin | United States (USA) |
| Dimension | 16*16*12cm |
| Weight | 1kg |
| HS Code | 8537101190 |
| Payment | T/T |
| Sales Price | $9000 |
| Warranty | 12 months |
| Lead time | 3-5 work days |
Additional Information:
| Features | |
| Battery Memory retention | For battery selection, installation and estimated life, refer to the PACSystems Controller Battery and Energy Pack Manual, GFK-2741. |
| Program storage | Up to 64 Mbytes of battery-backed RAM 64 Mbytes of non-volatile flash user memory |
| Power requirements | +5 VDC: 6.8 Amps nominal +12 VDC: 0.003 Amps nominal -12 VDC: 0.003 Amps nominal |
| Operating temperature | 0 to 60°C (32°F to 140°F), fan tray required |
| Boolean execution speed, typical | 0.02391ms per 1000 Boolean contacts/coils |
| Time of Day Clock accuracy | Maximum drift of ±2 seconds per day |
| Elapsed Time Clock (internal timing) accuracy | ±0.01% maximum |
| Embedded communications | RS-232, RS-485, Ethernet interface |
| Ethernet Ports | Embedded auto-sensing 10/100 Mbps half/full duplex Ethernet interface |
| Serial protocols supported | Modbus RTU Slave, SNP, Serial I/O |
Description:
The RX7i CPUs are programmed and configured by the programming software to perform real time control of machines, processes, and material handling systems.
The CPU communicates with I/O and smart option modules over a rack-mounted backplane using the VME64 Standard format. It communicates with the programmer and HMI devices via the embedded Ethernet ports or a serial port using SNP Slave protocol.
The IC698CPE040 CPU or Central Processing Unit is designed and manufactured by GE Fanuc in the GE RX7i PACSystem product line to be as powerful as possible.
The GE IC698CPE040 CPU is known for its fast program and application execution speed, considerable memory capacity, and ability to be easily upgraded.
This CPU can be used for a long time because it can accommodate upgrades that allow it to keep up with new technologies and new industrial application requirements.
The IC698CPE040 CPU is designed for use with the RX7i PACSystem PLC or Programmable Logic Controller. The load requirement of the IC698CPE040 CPU is 6.8 amps at 5 volts DC and 0.003 amps at both 12 volts DC and -12 volts DC.
Datasheet Link: GE IC698CPE040.pdf